Turning On Your Tv For The First Time - Insignia NS-32D220NA16 User Manual

NS-32D220NA16 Insignia 32" 720p 60Hz LED TV
Turning on your TV for the
first time
The first time you turn on your TV, the Easy Setup
wizard opens. The wizard guides you through setting
up basic settings including the menu language, time
setting, picture mode, TV signal source, and the
channel list.
1 Make sure that you have:
• Installed the remote control batteries. (See
page 31.)
• Connected an antenna, cable TV, or satellite TV.
(See page 13 through page 17.)
• Connected the AC power adapter. (See page 30.)
2 Press (power) to turn on your TV. The Easy Setup
wizard opens.
3 Press or to highlight a language, then press
ENTER.
4 Press
5 Press
Customize my TV
6 Press
www.insigniaproducts.com
or to highlight Home Use Mode or
Store Display Mode, then press ENTER.
If you selected Store Display Mode, a message
asks if you are sure you want this mode. Select OK
to continue using Store Display Mode, or select
Cancel to switch to Home Use Mode, then press
ENTER. Store Display Mode is not an energy
savings mode and displays a retail banner.
or to highlight an option, then press
ENTER. You can select:
• Watch TV to skip the customization options. You
can press MENU later to customize settings. Go
to "Finish the wizard" on page 34.
• Customize my TV to set options to maximize
your experience. Go to "Customize my
page 33.
or to highlight a time zone, then press
ENTER.
TV" on
33