Coaxial (Good) - Insignia NS-32D220NA16 User Manual

Coaxial (good)

On your TV
Coaxial cable
connector
ANT / CABLE
jack
1 Make sure that your TV's AC power adapter is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT / CABLE jack on the back of your TV and to the coaxial out jack on
the cable or satellite box.
4 Plug your TV's AC power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to highlight TV, then press ENTER.
7 If you cannot tune to channels you know exist, scan for channels. See
page 47.
Notes
16
• Use a coaxial cable to eliminate interference and noise from radio
waves.
• Do not bundle the coaxial cable with the AC power adapter or other
cables.
www.insigniaproducts.com
Cable or
satellite box
Coaxial cable
Back of TV
"Automatically scanning for
Insignia 32" 720p 60Hz LED TV
Cable
wall jack
channels" on