Installing A Wall-Mount Bracket - Insignia NS-32D220NA16 User Manual

NS-32D220NA16 Insignia 32" 720p 60Hz LED TV

Installing a wall-mount bracket

Warning
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches.
2 If the TV stands are installed, remove the screws that secure the stands to the TV screen.
3 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that
came with the wall-mount bracket for information about which screws to use and how to correctly hang your TV.
Notes
• Your TV has four VESA mounting holes on the back. If you attach a
wall-mount bracket to the back of your TV, the bracket must be
securely attached, using all four holes. If you do not use all four
mounting holes, your TV may fall and cause property damage or
personal injury. See the documentation that came with your wall mount
for complete mounting instructions.
• This TV is intended to be supported by a UL Listed wall mount bracket
with suitable weight/load. (See "Miscellaneous" on page 71.)
• The length of the wall-mount screws vary depending on the wall-mount
bracket you purchased. See the instructions that came with the
wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take type M4 screws.
www.insigniaproducts.com
7.87 in. (200 mm)
7