Assembly; Operation; Getting Ready - Bissell little green 1400 series User Manual

A
ssembly
Assembling your Little Green PROheat
is a simple process. The only thing you
will need to assemble your cleaner is a
Phillips head
1.
Slide the back plate of the flex hose clip into the
opening on the front of the unit. You will hear a
"snap" when it is locked in place.
2. Take the flex hose storage bracket and slide the
lower plate into the opening on the back of unit.
Make sure the screw holes line up.
3. Insert screw and tighten with a screwdriver.
4.
Wrap the flex hose around unit and place hose
grip into bracket. Turn bracket latch clockwise to lock
in place.
If your model includes a TurboBrush.
5.
Slide tool clip into slit on flex hose storage bracket
place tool on clip
O
peration

Getting ready

1.
To fill the clean/solution tank.
A. R emove the tank by lifting it straight up and
then away from the unit.
B. U nscrew the black cap at the bottom of the
clean/solution tank.
C. A dd BISSELL 2X Little Green Formula to the
FORMULA fill line on the clean/solution tank.
Fill the clean/Solution tank with hot (NOT boiling)
tap water to the WATER fill line.
Replace and tighten the black cap.
D. Replace the clean/solution tank by lining up the
vertical guides on the left side of the unit with
the indentations on the clean/solution tank and
gently sliding it down into position.
6
w w w . b i s s e l l . c a
screwdriver.
1.
2. 3.
4. 5.
5.
1A.
1C.
1B.
1D.
1 - 8 0 0 - 2 6 3 - 2 5 3 5