4.6.8.b. Setting learning mode of MAC address
On the Forwarding Database Information Menu, pressing "A" opens the MAC
Learning Menu screen, as shown in Fig. 4-6-19. In this screen, you can set a
learning mode of MAC address by port.
PN27089K/PN27089KA Local Management System
Forwarding Database Menu -> MAC Learning Menu
Port
MAC Learning
------ ------------
1
Auto
2
Auto
3
Auto
4
Auto
5
Auto
6
Auto
7
Auto
8
Auto
9
Auto
10
Auto
-------------------------------- <COMMAND> -----------------------------------
[S]et MAC Learning Mode
Command>
Enter the character in square brackets to select option
Screen Description
Port
Displays a port number.
MAC Learning
Displays a learning method of MAC address.
Available commands are listed below.
S
Switch learning mode.
Press "S." The command prompt changes to "Select Port Number to be changed>." Enter
a port number to change the setting. Then, the command prompt changes to "Change
MAC Learning Mode for port # (specified port number)>." Enter "A" when learning
automatically, or "D" when not learning MAC Address.
Q
Return to the previous menu.
Note:
When IEEE802.1X port-based authentication is activated, the MAC
Learning Mode for a port cannot be disabled in the MAC Learning
Menu.
[Q]uit to previous menu
Fig. 4-6-19 MAC Learning Menu
75