Table of Contents
Advertisement
ht
ea
el
DAY/NIGHT
You can display pictures in color or black and white.
1.
When the SETUP menu screen is displayed,
select 'DAY/NIGHT' by using the Up and
Down buttons so that the arrow indicates
'DAY/NIGHT'.
2.
Select a desired mode using the Left and
Right buttons according to the picture
display you want.
COLOR : The picture is always displayed
in color.
B/W : The picture is always displayed in
black and white.
-
IR MODE : When IR LED is turned on in B/W, the objects can be clearly
identifi ed due to the function that decreases screen saturation
of objects within a short distance.
AUTO : The mode is switched to 'Color
' in a normal environment, but
switches to 'B/W' mode when
ambient illumination is low. To set
up the switching time for AUTO
mode, press the Function Setup
switch. You can turn on or off the
burst signal on B/W mode.
-
BURST MODE : You can turn on or
off the burst signal on B/W mode.
-
DWELL TIME : You can select the duration time about changing the day/
night mode.
→3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
-
DURATION : You can select the brightness level at which the camera
switches from day to night mode.
Fast
Slow
※ Light levels are often site dependant.
1.LENS SHADE
2.EXPOSURE
3.WHITE BAL
4.SSDR
5.BACKLIGHT
6.SSNR3
7.DAY/NIGHT
8.SPECIAL
▶ 1.BURST MODE
2.COLOR→B/W
DURATION
DWELL TIME
3.B/W→COLOR
DURATION
DWELL TIME
4.RETURN
Color → B/W
2.5 lux
1 lux
MAIN SETUP
OFF
ATW
OFF
OFF
ON
AUTO
AUTO SETUP
ON
FAST
3 SEC
FAST
10 SEC
B/W → Color
5 lux
10 lux
English_25
Advertisement
Table of Contents
