Table of Contents
Advertisement
installation
INSTALLATION
1.
Separate the dome cover by counterclockwise rotation.
[Figure-1]
※ To install the dome cover on the camera body, turn the latches in locking direction as
shown in the figure 1.
M
The installation should be done by qualifi ed service personnel or system installers.
If the ceiling material is not strong enough to hold the installation screws, the camera may fall
off. Reinforce the ceiling as needed.
To change the position of the cable, take away the Hole Cover and pass the cable through.
12_ installation
Latch
Unlocking
direction
Original position of
the cable
Main Body
(Camera)
Locking Direction
(Clockwise)
Dome Cover
Hole Cover
Advertisement
Table of Contents
