Samsung SNB-3002 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. IP Camera
  5. SNB-3002
  6. User manual

Samsung SNB-3002 User Manual

Network camera
Hide thumbs Also See for SNB-3002:
Table of Contents

Advertisement

Quick Links

NETWORK CAMERA
User Manual
SNB-3002

Advertisement

Table of Contents
loading

Related Manuals for Samsung SNB-3002

Summary of Contents for Samsung SNB-3002

  • Page 1 NETWORK CAMERA User Manual SNB-3002...

  • Page 2: User Manual

    Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.

  • Page 3: Important Safety Instructions

    overview important Safety inStructionS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
  • Page 4 overview warninG TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
  • Page 5 class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Danger of explosion if battery is incorrectly replaced.
  • Page 6 overview Please read the following recommend safety precautions carefully. y Do not place this apparatus on an uneven surface. y Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. y Do not place this apparatus near conductive material.

  • Page 7: Table Of Contents

    contentS oveRview Important Safety Instructions Product Features Recomended PC Specifications Recomended SD/SDHC Memory Card Specifications What’s Included At a Glance iNSTALLATioN & Mounting the Lens CoNNeCTioN Inserting/Removing a SD Memory Card Memory Card Information (Not Included) Connecting with other Device NeTwoRk CoNNeCTioN Connecting the Camera Directly AND SeTup...
  • Page 8 overview web vieweR Connecting to the Camera Login Installing Silverlight Runtime Installing STW WebViewer Plugin Using the Live Screen Search and play by event Search and play by time SeTup SCReeN Setup Video & Audio Setup Network Setup Event Setup System Setup AppeNDix Specification...

  • Page 9: Product Features

    proDuct featureS y multi-Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs. y web Browser-based monitoring Using the Internet web browser to display the image in a local network environment. y alarm If an event occurs, the event-related video will be transferred to the FTP/email specified by the user or saved to the SD memory, or the event signal will be sent to the Alarm Out port.

  • Page 10: Recomended Pc Specifications

    overview recomenDeD pc SpecificationS y CPU : Intel Core 2 Duo 2.4GHz or higher y Operating System : Windows XP, VISTA, 7, Mac OS y Resolution : 1280X1024 pixels or higher y RAM : 2GB or higher y Web Browser : Internet Explorer 7.0 or Higher, Firefox 3.0 or Higher, Chrome 8.0 or Higher, Safari 4.0 or Higher Neither a beta test version unlike the version released in the company website nor the developer version will be supported.

  • Page 11: What's Included

    wHat’S incLuDeD Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Camera User Manual, Installer S/W CD, CMS S/W DVD Quick Guide C Mount Adapter Used to install the C Mount camera lens Auto Iris Lens Connector Camera Holder (Mount) Used to install the camera holder...

  • Page 12: At A Glance

    overview at a GLance front Side <Fixed Bracket> Item Description Camera Holder Used when you mount the camera onto the bracket by fixing the camera (Mount) Holes holder (mount) adaptor with the bracket. Used to fix the camera on a bracket or mounting bracket. The screw size : use this screw to fix the mounting bracket.
  • Page 13 Item Description Auto Iris Lens Installed on the lens adaptor. (Optional) Auto Iris Lens Used to supply power and output signal to control the iris of the lens. Connector Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol.

  • Page 14: Rear Side

    overview rear Side AUDIO OUT AUDIO IN SD CARD SD CARD SD CARD SD SYSTEM POWER RESET VIDEO NETWORK 1 2 3 4 5 6 LINK 1 : ALARM IN 4 : GND AC 24V 2 : ALARM OUT 5 : RS-485+ DC 12V 3 : ALARM COM 6 : RS-485- Item...
  • Page 15 Item Description System, Power, ON : While the power is on POWER SD Indicators OFF : If the power is off Resets the camera settings to the default. Press and hold it for about 5 seconds to turn off the system indicator and restart the system. If you reset the camera, the network settings will be adjusted so that Reset Button DHCP can be enabled.

  • Page 16: Installation & Connection

    installation & connection mountinG tHe LenS Disconnect the power before proceeding. The C lens and CS lens are not included in the product package. mounting the c lens Turn the C mount adaptor clockwise to insert it and do the same with the C lens. C Lens C Mount Adapter mounting the cS lens...

  • Page 17: Inserting/Removing A Sd Memory

    connecting the auto iris Lens connector Insert the lens connector into the corresponding hole of the camera. focusing Turn the lens left or right to control the zoom and focus the lens so that you can view a clear, sharp object. inSertinG/removinG a SD memory carD inserting a SD memory card Push the SD memory card in the direction of the arrow shown in the diagram.

  • Page 18: Card

    installation & connection removing a SD memory card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot. Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from the slot when released.

  • Page 19: Memory Card Information

    memory carD information (not incLuDeD) what is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Selecting a memory card that’s suitable for you Your camera supports SDHC memory cards.

  • Page 20: Connecting With Other Device

    installation & connection connectinG witH otHer Device Monitor AUDIO OUT AUDIO IN SD CARD SD CARD SD CARD SD SYSTEM POWER RESET VIDEO NETWORK 1 2 3 4 5 6 1 : ALARM IN 4 : GND LINK AC 24V 2 : ALARM OUT 5 : RS-485+ DC 12V 3 : ALARM COM 6 : RS-485-...
  • Page 21 connecting to audio input/output Speaker Microphone Microphone Network Speaker Speaker Amp Microphone 1. Connect the AUDIO IN port of the camera with the microphone directly or LINE OUT port of the amplifier that the microphone is connected to. 2. Connect the AUDIO OUT port of the camera with the LINE IN port of the speaker. 3.
  • Page 22 installation & connection alarm i/o wiring Diagram (5ma sink) ALARM IN (30vDc 2a, ALARM OUT 125vac 0.5a maX) ALARM COM RS-485+ RS-485- connecting to the i/o port box Connect the Alarm I/O signal to the corresponding port of the rear port box. 1 2 3 4 5 6 AUDIO OUT AUDIO IN...

  • Page 23: Network Connection And Setup

    network connection and setup You can set up the network settings according to your network configurations. connectinG tHe camera DirectLy to LocaL area networKinG connecting to the camera from a local pc in the Lan 1. Launch an Internet browser on the local PC. 2.

  • Page 24: Connecting The Camera Directly

    network connection and setup connectinG tHe camera DirectLy to a DHcp BaSeD DSL/caBLe moDem INTERNET DSL/Cable Modem External Remote PC Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2.

  • Page 25: Modem

    connectinG tHe camera DirectLy to a pppoe moDem INTERNET PPPoE Modem External Remote PC Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 26: Connecting The Camera To A Broadband Router With The

    network connection and setup connectinG tHe camera to a BroaDBanD router witH tHe pppoe/caBLe moDem This is for a small network environment such as homes, SOHO and ordinary shops. Camera INTERNET PPPoE or PPPoE or Broadband Cable Modem Cable Modem Camera Router External Remote PC...

  • Page 27: Buttons Used In Ip Installer

    ButtonS uSeD in ip inStaLLer Item Description Model name of the connected camera. Device Name Click the column to sort the list by model name. However, search will be stopped if clicked during the search. Alias This function is not currently implemented. Displays either <Static>, <Dynamic>...

  • Page 28: Static Ip Setup

    Exits the IP Installer program. For the IP installer, use only the installer version provided in the installation CD or use the latest one if available. You can download the latest version from the Samsung web site (www.samsungcctv.com). Static ip Setup manual network Setup Run <ip installer_v2.XX.exe>...

  • Page 29: Setup

    3. In the <address> pane, provide the necessary information. y MAC (Ethernet) Address : The MAC address imprinted on the camera label is automatically displayed and requires no user setting. You can configure the static IP settings only if the DHCP checkbox is unchecked. if not using a Broadband router For setting <ip address>, <Subnet mask>, and <Gateway>, contact your network administrator.
  • Page 30 network connection and setup if using a Broadband router y IP Address : Enter an address falling in the IP range provided by the Broadband Router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 y Subnet Mask : The <Subnet mask> of the Broadband Router will be the <Subnet mask>...
  • Page 31 auto network Setup Run <ip installer_v2.XX.exe> to display the camera search list. At the initial startup, both [auto Set] and [manual Set] will be grayed out. For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function.
  • Page 32 network connection and setup Dynamic ip Setup Dynamic ip environment Setup y Example of the Dynamic IP environment - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server - If connecting the camera directly to modem using the DHCP protocols - If IPs are assigned by the internal DHCP server via the LAN checking the Dynamic ip 1.
  • Page 33 port ranGe forwarD (port mappinG) Setup If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. manual port range forwarding 1.
  • Page 34 network connection and setup Setting up port range forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. If you don’t set properly the TCP 943 port of the router, you cannot get any video stream from the web page of the camera.

  • Page 35: Connecting To The Camera From A Shared Local Pc

    connectinG to tHe camera from a SHareD LocaL pc 1. Run the IP Installer. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. Access to the camera can also be gained by typing the camera’s IP address in the address bar of the Internet browser.

  • Page 36: Connecting To The Camera

    web viewer connectinG to tHe camera normally, you would 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. •...
  • Page 37 To register your device to the <DDnS> server, visit www.samsungipolis.com and register your device first, and then set the Web Viewer’s <network> - <DDnS> to <Samsung DDnS>, as well as providing <product iD> that had been used for DDNS registration.
  • Page 38 web viewer inStaLLinG SiLverLiGHt runtime If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. ` to install on windows oS 1.
  • Page 39 5. When done, click <close>. ` to install on mac oS 1. Run the file trailing with “.dmg”. 2. Run the install package file automatically created, ending with “.pkg”. 3. Click <continue>. English _39...
  • Page 40 web viewer 4. Select your language on the language selection screen, and click <continue>. 5. Click <agree>. 6. Click <install>. 40_ web viewer...
  • Page 41 7. Enter the password of the account currently logged in, and click <install Software> and continue. 8. Once completed, click <close>. English _41...
  • Page 42 “There is no VC++ 2010 runtime installed. Please install the runtime library.” Run the vcredist_x86.exe file which can be found from Samsung website at www.samsungcctv.com or the provided installation CD. The vcredist_x86.exe file is installer program of Microsoft’s Visual Studio 2010 redistributable package for 32-bit operating systems.
  • Page 43 uSinG tHe Live Screen Item Description Monitoring Move to the monitoring screen. Playback Switch to the monitoring screen that plays recording data in the SD memory. Setup Move to the Setup screen. Displays the Live video on the screen. Viewer Screen You can use the mouse wheel to activate the digital zooming in Viewer screen.
  • Page 44 web viewer Item Description Full Screen Switch the current video to the maximum size of the monitor. Capture Saves the snapshot as an image file in the .bmp or .jpg format. Audio/Microphone Enable/disable audio and microphone, and controls volume. Control Alarm output Activate the Alarm Out port.
  • Page 45 to control the audio sound 1. Click [audio ( )] icon to activate audio communication. 2. Use [ ] bar to control the volume. to control microphone 1. Click [mic ( )] icon to activate the microphone. to control the ptZ 1.
  • Page 46 web viewer If more than 500 events are recorded within the search period, your search will be limited up to the date when the 500th event is recorded. For instance, if the search period is between 10th and 15th day of the month, and more than 500 events were recorded 10th through 11th, your search will be limited up to 11th day with a total of 500 events, and events after then (from 12th) will not be found.
  • Page 47 6. Move [time bar ( )] to a desired time point of the video before playing it. The time containing a normal recoding file will be highlighted in blue; the time with the event recording will be highlighted in red. to check time information of the playing video 1.

  • Page 48: Video Profile

    setup screen Setup You can configure the video & audio, network, event and system settings of the camera in the network. 1. In the Live screen, click [ Setup ( ) ] . 2. The Setup screen appears. Microsoft Sliverlight 4.0 is required to be installed on the PC for setup pages that provide preview video.
  • Page 49 • Default profile : If no profile is selected when using the Web Viewer, the default video profile is applied. • E-mail/FTP profile : Video profile to be transferred to the specified email or FTP site. Only the MJPEG codec can be set as the E-mail/FTP profile. •...
  • Page 50 setup screen to add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition. 1. Select one from the <video profile> options. 2. Provide the name and select a codec. 3.

  • Page 51: Video Setup

    what is Gov length? GOV(Group of Video object planes) is a set of video frames for MPEG-4 and H.264 compression, indicating a collection of frames from the initial I-Frame (key frame) to the next I-Frame. GOV consists of 2 kinds of frames: I-Frame and P-Frame. I-Frame is the basic frame for the compression, also known as Key Frame, which contains one complete image data.
  • Page 52 setup screen to set the privacy zone You can specify a certain area of the camera video to be protected for your privacy. 1. Set it to <on>. 2. When done, click [apply ( 3. Specify the <color> that will fill the privacy area.

  • Page 53: Camera Setup

    SSDr (Samsung Super Dynamic range) Setup In a scene where the difference between bright and dark is severe, you can increase the brightness of the dark area alone to regulate the overall brightness.
  • Page 54 setup screen • AWC : Corrects the colors of the camera video to be optimized to the current lighting condition and screen mode. You may need readjustment if the lighting condition is changed. • 3200K : Set the color temperature to 3200K. •...
  • Page 55 exposure Setup You can adjust the exposure level of the camera. 1. Select <exposure>. 2. Select each item and set it properly. • Brightness : Adjust the screen brightness. • Shutter mode : Adjust the electronic shutter of the camera. - Manual : Adjust the shutter speed of the camera manually.
  • Page 56 setup screen Special Setup 1. Select <Special>. 2. Select each item and set it properly. • DIS : Automatically compensates for the flicker on the screen. • Day & night : You can switch the mode to adjust the black and white level as well as the colors.
  • Page 57 oSD Setup 1. Select <oSD>. 2. Select each item and set it properly. • Camera title : Specify whether or not to display the camera title on the screen. You can enter up to 15 characters for the title. • Camera title position X, Y : Specify the coordinates where the camera title is displayed on the screen.
  • Page 58 3. Specify the serial port. You can set the RS-485 communication mode for pan/tilt-compliant receiver that is connected to the network camera. • Protocol : From SAMSUNG-T/ SAMSUNG-E / PELCO-D/PELCO-P / SUNGJIN, select the same protocol as that of the receiver.
  • Page 59 6. Set the zoom and focus. • [Zoom in ( )] : Zooms in the screen. • [Zoom out ( )] : Zooms out the screen. • [adjust focus ( )] : Adjusts the focus in the screen. • [Zoom Speed control ( )] : The bigger the number is, the faster the zoom speed becomes.

  • Page 60: Network Setup

    setup screen networK Setup interface 1. From the Setup menu, select the <network ( )> tab. 2. Click <interface>. 3. Set the <interface>. • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway, DNS1, and DNS2.
  • Page 61 Setting the HTTP port for Safari and Google Chrome browsers to 65535 is not allowed by security policy. • Device port : Set a port used to transfer video signals with the Samsung protocols. • RTSP port : Used to transfer videos in the RTSP mode; the default is 554.
  • Page 62 • Samsung DDNS : Select this if you use the DDNS server provided by Samsung Techwin. - Product ID : Enter the product ID that is registered with the Samsung DDNS service. - Quick connect : It sets port forwarding automatically when used with a UPnP (Universal Plug and Play) supporting router.
  • Page 63 DDnS to register your product with the Samsung DDnS 1. Visit the iPOLiS web site (www.samsungipolis.com) and sign in with a registered account. 2. From the top menu bar, select <DDnS Service> - <my DDnS>. 3. Click [proDuct reGiStration].
  • Page 64 Samsung DDnS in camera setup 1. From the DDNS setup page, set <DDnS> to <Samsung DDnS>. 2. Provide the <product iD> that you registered product ID with the DDNS site. 3. Click [apply (...
  • Page 65 ip filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the <network ( )> tab. 2. Click <ip filtering>. 3. Select <filtering type>. • Deny : If selecting this, access from those IPs that are added to the filtering will be restricted.
  • Page 66 setup screen You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the <network ( )> tab. 2. Click <SSL>. 3. Select a secure connection system. To access the camera using HTTPS mode, you have to type the IP address for the camera in the form of “https://<Camera_IP>”.
  • Page 67 802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1. From the Setup menu, select the <network ( )> tab. 2. Click <802.1x>. 3. Set the <ieee 802.1x setting(eapoL using eap-tLS)>. • Enable IEEE 802.1x : Specify the use of the 802.1x protocol.
  • Page 68 setup screen You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the <network ( )> tab. 2. Click <QoS>. 3. Click the [add ( )] button. The IP list will be created. 4.

  • Page 69: Event Setup

    • Enable SNMP v3 : SNMP version 3 will be active. - Password : Specify the default password for SNMP version 3. The default password is <admin4321>. The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.
  • Page 70 setup screen - Port : The default port of the FTP server is 21; however, you can use a different port number according to the FTP server settings. - Passive mode : Select <on> if you need to connect in passive mode due to the firewall or the FTP server settings.
  • Page 71 Storage You can set the record conditions or the use of recording for the SD memory, check the size of stored data, or format the SD memory itself. 1. From the Setup menu, select the <event ( )> tab. 2. Click <Storage>. to make recording on the SD memory 1.

  • Page 72: Alarm Input

    setup screen alarm input You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the <event ( )> tab. 2. Click <event setup>. 3. Select <alarm input> from <event action setup>. 4. Set whether or not to <enable>. 5.
  • Page 73 time schedule You can set to save the video data at a certain interval as scheduled regardless of the actual occurrence of the event. 1. From the Setup menu, select the <event ( )> tab. 2. Click <event setup>. 3. Select <time schedule> from <event action setup>.

  • Page 74: Tampering Detection

    setup screen tampering detection You can set to detect tampering attempts and trigger events, such as sudden change of camera’s framing direction, blocked lens and other overall change of scenes from the video. 1. From the Setup menu, select the <event ( )>...

  • Page 75: Motion Detection

    motion detection Events of motion detection can be set to trigger event signal output. 1. From the Setup menu, select the <event ( )> tab. 2. Click <event setup>. 3. Select <motion detection> from <event action setup>. 4. Set whether or not to <enable>. 5.
  • Page 76 setup screen Before using, set the minimum and maximum motion sizes to suit desired motion range to be detected. Detected size of an object may have difference with the actual size according to its shape. Up to 16 objects from the top side of the screen can be displayed. In the following cases, motion detection function may be degraded or cause improper detection.
  • Page 77 to use motion detection It detects a motion that meets all conditions specified by size and area. 1. Select <Size> tab. You can limit the minimum/maximum size of motion to be detected. • Minimum size : To set the minimum size of detected motions, select desired minimum size on the screen.
  • Page 78 setup screen network disconnection You can receive and save events of a physically disconnected network. 1. From the Setup menu, select the <event ( )> tab. 2. Click <event setup>. 3. Select <network disconnection> from <event action setup> . 4. Set whether or not to <enable> . 5.

  • Page 79: System Setup

    4. Set the alarm output button. • Mode : Sets the alarm output method. There is difference between operations when clicked alarm output button while disabled. - Pulse : It is activated during the time period specified by the duration (switching interval) and then becomes inactive automatically.
  • Page 80 setup screen Date & time 1. From the Setup menu, select the <System ( )> tab. 2. Click <Date & time>. 3. Specify the time and date that will be applied to the camera. • Current system time : Displays the current time settings of your system.
  • Page 81 user 1. From the Setup menu, select the <System ( )> tab. 2. Click <user>. 3. Provide the necessary user information. • Administrator password change : Change the password for the administrator. The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.
  • Page 82 setup screen upgrade / reboot 1. From the Setup menu, select the <System ( )> tab. 2. Click <upgrade / reboot>. 3. Select a desired item and set it appropriately. • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default.
  • Page 83 If you forcibly terminate the upgrade process, upgrade will not be completed properly. During restarting the system, accessing with web viewer will not be made. You can download the latest version from the Samsung web site (www.samsungcctv.com). to back up the current settings 1.
  • Page 84 setup screen You can check the system log or event log. 1. From the Setup menu, select the <System ( )> tab. 2. Click <Log>. 3. Select a log type. • System : You can check the system logs where any system changes are recorded including the time information.
  • Page 85 profile access You can check the profile information. 1. From the Setup menu, select the <System ( )> tab. 2. Click <profile access>. • Profile access : Show the information of the newly added profile. - Profile : Show the information of the newly added codec.
  • Page 86 appendix Specification Items Description Imaging Device 1/3” Super-HAD PS CCD Total Pixels NTSC : 811(H) x 508(V), PAL : 795(H) x 596(V) Effective Pixels NTSC : 768(H) x 494(V), PAL : 752(H) x 582(V) Scanning System Progressive (If WDR on, Interlaced Scan) NTSC : H : 15.734KHz / V : 59.94Hz, Video Frequency...
  • Page 87 Backlight Compensation Off / BLC / WDR Wide Dynamic Range NTSC : 128X, PAL : 160X Contrast Enhancement SSDR (Samsung Super Dynamic Range) (Off / On) Motion Adaptive 2D+3D Noise Filter (Off/Low/Middle/High/ Digital Noise Reduction User) Digital Image Stabilization Off / On...
  • Page 88 appendix Items Description Ethernet RJ-45 (10/100BASE-T) Video Compression Format H.264, MPEG-4, MJPEG NTSC : 704x480, 640x480, 352x240, 320x240 Resolution PAL : 704x576, 640x480, 352x288, 320x240 Max. Framerate NTSC : 30fps, PAL : 25fps H.264/MPEG-4 : Compression Level, Target Bitrate Level Video Quality Adjustment Control MJPEG : Quality Level Control...
  • Page 89 Items Description Memory Slot SD/SDHC Memory Slot ONVIF Conformance English, French, German, Spanish, Italian, Chinese, Korean, Russian, Japanese, Swedish, Denish, Portuguese, Czech, Language Polish, Turkish, Rumanian, Serbian, Dutch, Croatian, Network Hungarian, Greek, Finnish, Norwegian Supported OS : Windows XP / VISTA / 7, MAC OS Supported Browser : Internet Explorer 7.0 or Higher, Web Viewer Firefox 3.0 or Higher, Chrome 8.0 or...

  • Page 90: Product Overview

    appendix proDuct overview Unit : mm (inch) 138.6 (5.45") (2.83") 136.8 (5.38") 90_ appendix...

  • Page 91: Troubleshooting

    trouBLeSHootinG PROBLEM SOLUTION y Check to make sure that the camera’s Network settings are appropriate. y Check to make sure that all network cables have been connected properly. I can’t access the camera from a y If connected using DHCP, verify that the camera is able to acquire web browser.
  • Page 92 appendix PROBLEM SOLUTION y Verify the settings in the following sequence: <Motion detection> of <Event A. Check <Data & Time> settings. setup> is set to <Enable>, but B. The <Motion detection> should be set to <Enable>. no notification e-mail reaches me even when an event had occurred.

  • Page 93: Gnu General Public License

    Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
  • Page 94 4. You may not copy, modify, sublicense, or distribute the c) If the modified program normally reads commands interactively when run,you must cause it, when started Program except as expressly provided under this License. running for such interactive use in the most ordinary Any attempt otherwise to copy, modify, sublicense or way, to print or display an announcement including distribute the Program is void, and will automatically...
  • Page 95 9. The Free Software Foundation may publish revised and/ This program is distributed in the hope that it will be or new versions of the General Public License from time useful, but WITHOUT ANY WARRANTY ; without even the to time. Such new versions will be similar in spirit to implied warranty of MERCHANTABILITY or FITNESS FOR the present version, but may differ in detail to address A PARTICULAR PURPOSE.
  • Page 96 To protect your rights, we need to prevent others from that (1) displays an appropriate copyright notice, and (2) denying you these rights or asking you to surrender tells the user that there is no warranty for the work (except the rights.
  • Page 97 3. protecting users’ Legal rights from anti-circumvention a) Convey the object code in, or embodied in, a physical Law. product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a No covered work shall be deemed part of an effective durable physical medium customarily used for software technological measure under any applicable law fulfilling interchange.
  • Page 98 occurs as part of a transaction in which the right of permits relicensing or conveying under this License, possession and use of the User Product is transferred to the you may add to a covered work material governed by recipient in perpetuity or for a fixed term (regardless of how the terms of that license document, provided that the the transaction is characterized), the Corresponding Source further restriction does not survive such relicensing or...
  • Page 99 11. patents. 12. no Surrender of others’ freedom. A “contributor” is a copyright holder who authorizes use If conditions are imposed on you (whether by court order, under this License of the Program or a work on which the agreement or otherwise) that contradict the conditions of Program is based.
  • Page 100 A FAILURE OF THE PROGRAM TO OPERATE WITH ANY Finally, software patents pose a constant threat to the OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER existence of any free program. We wish to make sure that PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF a company cannot effectively restrict the users of a free SUCH DAMAGES.
  • Page 101 The “Library”, below, refers to any such software library Thus, it is not the intent of this section to claim rights or or work which has been distributed under these terms. A contest your rights to work written entirely by you; rather, “work based on the Library”...
  • Page 102 6. As an exception to the Sections above, you may also a) Accompany the combined library with a copy of the same combine or link a “work that uses the Library” with the work based on the Library, uncombined with any other Library to produce a work containing portions of the library facilities.
  • Page 103 enD of termS anD conDitionS 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted How to Apply These Terms to Your New Libraries If you interfaces, the original copyright holder who places develop a new library, and you want it to be of the greatest the Library under this License may add an explicit possible use to the public, we recommend making it free...
  • Page 104 6. Redistributions of any form whatsoever must retain THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ‘‘AS the following acknowledgment: “This product includes IS AND ANY EXPRESS OR IMPLIED WARRANTIES, software developed by the OpenSSL Project for use in the INCLUDING, BUT NOT LIMITED TO, THE IMPLIED OpenSSL Toolkit (http://www.openssl.org/)”...
  • Page 105 4. Neither the name of the University nor of the Department and SNMP v3 using both IPv4 and IPv6. For more additional information, send email to help.cctv@samsung.com. may be used to endorse or promote products derived from this software without specific prior written Copyright (C) 2004, Kneschke, incremental permission.
  • Page 106 PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT THE COPYRIGHT OWNER OR CONTRIBUTORS BE HOLDERS AND CONTRIBUTORS "AS IS" AND ANY LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, EXPRESS OR IMPLIED WARRANTIES, INCLUDING, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR...
  • Page 107 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR MERCHANTABILITY AND FITNESS FOR A PARTICULAR...
  • Page 108 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT THIS SOFTWARE IS PROVIDED BY APPLE AND ITS HOLDERS AND CONTRIBUTORS “AS IS” AND ANY CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF IMPLIED WARRANTIES OF MERCHANTABILITY AND MERCHANTABILITY AND FITNESS FOR A PARTICULAR...
  • Page 109 the mit License Some software components of this product incorporate source code covered under the MIT license as follows mit License 2.0 - Acewidget, bettermeans, jquery-ui, libxml, libxml2, Mesa3D-MesaLib,mwEmbed,OpenGL Samples Pack, Wide Studio, xorg-server Copyright (c) 2011, The Dojo Foundation Copyright 2010, AUTHORS.txt (http://jqueryui.com/about) Dual licensed under the MIT or GPL Version 2 licenses.
  • Page 110 the independent JpeG Group’s JpeG Software The software included in this product contains copyrighted software that is licensed under the JPEG license. • JPEG license - Code project – Generating Outline OpenGL, Libjpeg This distribution contains the sixth public release of the Permission is NOT granted for the use of any IJG author’s Independent JPEG Group’s free JPEG software.
  • Page 111 License Since we, at Samsung Techwin, used the Mozilla Firefox component without modifying the source code according to the MOZILLA Public license 1.1, we are not obliged to provide the source code of the corresponding component. • Version 1.1 1.
  • Page 112 (d) Notwithstanding Section 2.2(b) above, no patent license is Contributor represents that, except as disclosed pursuant to granted: 1) for any code that Contributor has deleted from Section 3.4(a) above, Contributor believes that Contributor’s the Contributor Version; 2) separate from the Contributor Modifications are Contributor’s original creation(s) and/or Version;...

  • Page 113: Disclaimer Of Warranty

    5. application of this License. upon in writing by the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under This License applies to code to which the Initial Developer has Sections 2.1 and/or 2.2 automatically terminate at the attached the notice in Exhibit A and to related Covered Code.
  • Page 114 Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this License. 12. reSponSiBiLity for cLaimS. As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this License and You agree to...
  • Page 115 Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
  • Page 116 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungcctvusa.com...

Table of Contents