Advertisement
Installation
You can install the camera on the wall, ceiling, cabinet or desired locations.
1.
Attach the installation template to the selected area and drill
2 holes as shown in the figure.
2.
Use
the
2
supplied screws
to
fix
the
camera
to
the 2
drilled
holes.
•
Set the
<FRONT
TOP>
mark
imprinted on
the
camera to face the
direction
of camera monitoring.
3.
Con:1ect
the
camera internal terminal with the
corresponding cable.
4.
Adjust the lens in a desired direction by referring to the
"Adjusting
the monitoring direction for the camera"
section.
•
We recommend you not to touch the lens as the camera lens has been properly focused in the final process of
manufacturing.
If
so, the lens may be out of focus or stained by foreign substances.
5.
Secure the cover back onto the base. Make sure the arrow on the base
is align with the mark on the cover.
"
Pay attention to the direction for assembly.
English _5
Advertisement
