Table of Contents
Advertisement
2.
Make sure the gold pin connection is on the correct side of the
battery compartment.
3.
Insert the cover hook into the recess and gently push the cover
until it fully locks into place.
1.4.3
Charging Battery
You can use the adaptor attached to charge the lithium-ion battery.
Just insert the battery into the Digital Projector Camcorder and
connect the adaptor to the camcorder and a power outlet. (You can
also connect to a computer via a USB cable.)
Battery charging status:
Red light – Battery is charging.
Light off – Battery charging is done. (A full charge takes about 2
hours and 30 minutes).
18
Advertisement
Table of Contents
