Powering / Charging the Projector
5 6
4
• Keep the battery charged to at least 60% (3 bars on the battery status icon) to ensure a successful OTA update.
• See "LED Indicators" on page 4 for charging behavior of the LED Indicator.
• Once the projector is fully charged the adapter can be disconnected.
• For initial power up, press and hold the Power Button for 3 seconds.
• When the projector is on, press the Power Button to enter power-saving mode.
• When the projector is on, press and hold the Power Button for 3 seconds to turn off the projector.
• For AC/DC adapter, the socket-outlet shall be installed near the equipment and shall be easily accessible.
5 6
4
6
3"
5
6
4
5
6
4