Panasonic KX-TC1871CB Operating Instructions Manual page 48

" Using the Directory
(FUNCTION/EXIT/CH)
1
Press
2 While the arrow points to "Save
directory", press
key).
≥The display shows the number of stored items
in the directory.
3
Enter a name, up to 15 characters, with the
dialing buttons, BACK
(fl)
.
≥See the steps for entering names and symbols
(p. 49).
≥If a name is not required, press (›) (Next
key) and go to step 5.
(›)
4 Press (Next key).
5 Enter a phone number, up to 22 digits.
≥Each time you press (INTERCOM/CLEAR), a
character is erased from the right. To erase all
of the digits, press and hold
(INTERCOM/CLEAR).
(›)
6
Press (Next key).
FWD/EDIT (fl)
7 Press
≥A beep sounds.
≥To continue storing other items, repeat from step 2.
≥To return to the standby mode, press (FUNCTION/EXIT/CH).
≥If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number counting as one digit (p. 59) in step 5.
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
≥If the display shows "Directory full" in step 2, the display will return to
step 1. Press (FUNCTION/EXIT/CH) to exit the list. To erase other stored items
from the directory, see page 55.
≥If the display shows "Save error" in step 7, the item cannot be stored in the
directory. Try again from step 1.
48
.
FWD/EDIT (fl)
(Yes
(fi)
or FWD/EDIT
(Save key).
1Save directory
Calling pager
1=Yes
4 3
Directory=
20 items
Enter name
21 =Next
4
Enter name
Tom Jones
=Next
21
4
Enter phone no.
0987654321
=Next
21
4
Tom Jones
0987654321
1=Save