Superior DRT4036TEN Installation And Operation Instructions Manual page 21

Direct-vent gas fireplace
Table of Contents

Advertisement

LAVA ROCK, DECORATIVE GRATE,
EMBER FLAKES AND SCRAP LOG
INSTALLATION
Lava rock, ember flakes and scrap log pieces are
included with your fireplace. Install these items
while glass doors are open and/or removed.
1. Follow instructions from Removing/Re-
placing Glass Door, page 20, to move
glass out of the way of this installation.
2. For 36" models only: Install 3 loose logs
by placing log #1, log #2 and log #3 onto
one piece log as shown in Figures 28, 28a
and 28b.
Loose Log #3
Glowing Embers
Figure 28 - Installing Loose Logs
Figure 28a - Installing Loose Log #1
126721-01A
FIREPLACE INSTALLATION
Loose Log #1
Underneath Log #2
Loose Log #2
Loose Log #1
www.SuperiorFireplaces.US.com
Continued
Loose Log #3
Figure 28b - Installing Loose Logs #2
3. Place lava rock around base of burner.
Make sure burner ports are not covered
(see Figure 29).
4. Place ember flakes around front and sides of
burner and on burner ports (see Figure 30,
page 22). This will create the glowing ember
appearance as the flame touches the ember
flakes. Do not block burner ports or pilot ports
by overlapping ember flakes in one area. It
is not necessary to use all ember material
provided.
Figure 29 - Installing Lava Rock
Loose Log #2
and #3
Lava Rock
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Drt4036tepDrt4042tenDrt4042tep

Table of Contents