Lowrance iFINDER Hunt Operation Instructions Manual page 129

If you want to navigate to the found street at the cursor location, just
press |
MENU ENT
Find an Intersection
You must enter one street in the First Street dialog box and enter the
next street in the Second Street dialog box.
1. Press |↓ to
FIND
2. You must first fill in a street name in the First Street dialog box. Press
to display the Find By Name menu. There are two options: A. You
ENT
can spell out the street in the top selection box. Press ↑ or ↓ to change
the first letter, then press → to move the cursor to the next letter and
repeat until the name is correct, then press
to the lower selection list by pressing
street from the list and press
3. The Find Streets menu reappears with the street you're searching for
in the First Street box.
4. Now fill in the second street. Press ↓ to
Find by Name menu appears again. Just like before, there are two op-
tions: A. You can spell out the street in the top selection box. Press ↑ or
↓ to change the first letter, then press → to move the cursor to the next
letter and repeat until the name is correct, then press
jump down to the lower selection list by pressing
to select the second street from the list and press
5. The Find Streets menu reappears with the first and second streets
dialog boxes filled in. In this example, we selected 81st Street as our sec-
ond street. You could now use similar techniques to select a city but your
search will probably be faster if you leave that box blank.
Find first street (left); Street found (right).
.
|
S ENT
TREETS
and the
F
IND
, then press ↓ or ↑ to select a
ENT
.
ENT
121
menu appears.
S
TREETS
| . B. Or jump down
ENT ENT
|
S S
ECOND TREET
ENT
, then press ↓ or ↑
ENT
.
ENT
and the
ENT
| . B. Or
ENT