Table of Contents
Advertisement
3.3.9 Storage Coniguration
SATA Controller(s)
Use this item to enable or disable SATA Controller.
SATA Mode Selection
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive. Press
<Ctrl+I> to enter RAID ROM during UEFI POST process.
SATA Aggressive Link Power Mgmt
Use this item to enable or disable SALP.
Hard Disk S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis, and
Reporting Technology) feature. Coniguration options: [Disabled] and [Enabled].
SATA Port_0 / SATA Port_1
Depending on how many SATA ports you have, you will see SATA_x (x means numbers)
listed on the screen, with its status indicated as SATA device [(Model Name)] or [Not
Detected].
Enter either one of the options will see the followings:
44
Advertisement
Table of Contents
