Janome MB-4S Instruction Book page 70

.
3
Format
Reset all to defaults
t
Format memory?
All the stored data will be erased.
RCS
3
Format
Reset all to defaults
3
Format
Reset all to defaults
⁄0
3
Format
Reset all to defaults
. Formatting the memory
w
q
If the internal memory or media does not function due
to damage to the memory bank, you need to re-enable
Yes
it by formatting the memory.
Press the arrow key (up or down) to select the desired
memory location.
Press the circle key next to "Yes" and the confirmation
message will appear.
Press the OK key to format the memory. If you do not
wish to format, press the exit key.
q Arrow keys (up, down)
w Circle key (Yes)
r e
e OK key
r Exit key (X)
t Confirmation dialog box
NOTE:
If you format all the data stored in the memory will be
erased and cannot be restored. You are recommended
to save the data in other memory location before
Yes
formatting.
Yes
⁄0 Resetting all to defaults
w
All the parameters in the setting mode, except for the
language, will be reset to the original values (factory
Yes
setting) by pressing the circle key next to "Yes".
w Circle key (Yes)
Press the OK key to register the new settings.
Or press the next page key to go to the next page.
68