2.7 Jumper Setup
he illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is "Short". If no jumper cap is placed on the pins, the jumper
is "Open". he illustration shows a 3-pin jumper whose pin1 and pin2 are "Short"
when a jumper cap is placed on these 2 pins.
ME Recovery Jumper
(3-pin ME_RECOVERY1)
(No. 2)
CPU PECI Mode Jumper
(3-pin PECI_SEL1)
(No. 1)
Descriptor Security Override
Jumper
(3-pin J100)
(No. 3)
PMBUS Mode Jumper
(3-pin PMBUS_CLK_SEL)
(No. 7)
(3-pin PMBUS_DATA_SEL)
(No. 8)
(3-pin PMBUS_ALT_SEL)
(No. 9)
ME Recovery Mode
CPU PECI connect to PCH
Descriptor Security Over-
ride
PMBus connected to BMC
(Default)
EPC612D4U Series
Normal Mode (Default)
CPU PECI connect to BMC
(Default)
No Override (Default)
PMBus connected to PCH
31