Table of Contents
Advertisement
3.4.5 PCH Coniguration
PCH sSATA Coniguration
sSATA devices and settings
sSATA Controller
Use this item to enable or disable SATA Controller.
sSATA Mode Selection
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive. Press
<Ctrl+I> to enter RAID ROM during UEFI POST process.
sSATA Aggressive Link Power Mgmt
Use this item to enable or disable SALP.
sSATA Port 0 / 1
Hot Plug
Designates this port as Hot Plugglable.
Spin Up Device
If enabled for any of ports, Staggered Spin Up will be performed and only the drives which
have this option enabled will spin up at boot. Otherwise all drives spin up at boot.
68
Advertisement
Table of Contents
