Update Options; Save Trail; Show Trail; Icons - Lowrance GlobalMap 100 Installation And Operation Instructions Manual

Update Options

By default, the plotter places a dot on the screen every
3 seconds to create the plot trail. You can change this
time from once per second to once every thirty min-
utes. The plot trail can also be updated by distance
instead of by time. The distance update rate can be set
from 0.01 to once every 10 miles.
From the trail options menu, choose "UPDATE BY" to
change the update rate or type. To change the rate or
distance, simply select either the "UPDATE RATE" or
'UPDATE DIS" menus as appropriate, use the left or right arrow keys to
adjust it, then press the EXIT key to erase the menu.
PLOT TRAILS - Save Trail
This unit automatically saves the current plot trail in
memory when you turn it off. You can save two other
trails in memory. To save your current plot trail in a spe-
cific memory location, choose "SAVE TRAIL" from the
"TRAIL OPTIONS" menu. The screen shown at right
appears. Highlight the desired number that you wish to
save the current trail under, (i.e. "Trail 1 or Trail 2) and
press the right arrow key. Your current trail is saved.
Press the EXIT key to erase this menu.
PLOT TRAILS - Trails Shown
The current plot trail shows on the plotter by default. To
place a previously saved trail onto the plotter, choose
"TRAILS SHOWN" from the Trail Options menu. The
screen shown at right appears. Highlight the desired
trail on this screen, then press the right arrow key to
select it. Press the EXIT key to erase this menu. The
selected plot trail shows on the plotter.

ICONS

The plotter has 28 symbols or "icons" available that can be placed any-
where on the screen. They can be used to mark fishing or hunting loca-
tions, landmarks, boat ramps, and virtually any point of interest. An icon
can be placed at your present position or at the cursor's location.
17