Plotter Screens - Lowrance GlobalNav 310 Installation And Operation Instructions Manual

Nav Screen #2
The navigation screen shows navigation
information in large digital numbers. To
view this screen, press the MODE key,
then press the up arrow key until the
black box surrounds the "NAV 1" label.
Now press the right arrow key. A screen
similar to the one at right appears. Press
the EXIT key to erase the mode menu.
This screen is composed of eight digital display boxes, showing your
track (TRK), and ground speed (GS). The other boxes show navigation
data when a waypoint is recalled, including bearing to the waypoint (BRG),
course (CRS), Altitude (ALT), distance to waypoint (DIS), velocity made
good (VMG), and cross track error (XTK).
Plotter
The plotter lets you see your course and track from a "birds-eye" view. If
you've recalled a waypoint, the plotter show your staring location, present
position, and destination. However, you don't have to recall a waypoint to
use the plotter.
To use the plotter, simply press the
MODE key, then press the up or down
arrow keys until the "Plot" label is
higlighted. Press the EXIT key to erase
the mode menu. A screen similar to the
one at right appears. This is plot-1. The
diamond flashing in the center of the
screen is your present position. The solid
line extending from the diamond is your
track, or path you've tr avelled. The
plotter's range is shown in the lower left corner of the screen. In this
example, the plotter's range is two miles from the left edge of the screen
to the right.
There are two different plotter screens
available. Map screen number 1 shows
by default. Your current position displays
at the center of the screen by a cross
surrounded by a flashing diamond.
To view the other plotter screen, press
the MODE key. Press the up or down ar-
14