Lowrance iWAY 100M Operation Instructions Manual page 15

After assembling the mount as described, slide the iWAY into the cradle
and connect the power cable. You can loosen the socket arm nut to posi-
tion the unit for optimum viewing, then tighten it snugly. To remove the
bracket, pull on the suction release tab to break the vacuum seal.
Suction
Locking lever in "On" position
release
tab
Press down hard and turn lock.
RAM suction cup base on windshield.
If the suction cup mount has problems staying on, clean the mounting
surface and the suction cup with alcohol, then reinstall. Moistening the
suction cup may help adhesion in some cases.
Hundreds of other RAM mounting systems are available for your unit.
There are permanent mounts and temporary mounts suitable for virtu-
ally any vehicle, even motorcycle handlebars.
See your Lowrance dealer or visit the LEI web site, which can be found
at www.lei-extras.com, for the latest options stocked by LEI, the
accessory source for Lowrance and Lowrance Automotive. For a
complete look at the many mounting options, visit the RAM web site at
www.ram-mount.com, or call their purchasing support department at
206-763-8361. Or write to RAM: National Products Inc., 1017 S
Elmgrove St, Seattle, WA 98108, USA.
If you have questions, contact us at the following phone numbers: In
the U.S., call LEI Extras toll-free at 800-324-0045, 8 a.m. to 4 p.m. Cen-
tral Standard Time, M-F. In Canada, call toll-free 800-661-3983, 8 a.m.
to 5 p.m. Eastern Standard Time, M-F. If you live outside the U.S. and
Canada, you should contact the dealer in the country where you pur-
chased your unit. To locate a dealer near you, visit the Lowrance web
site, www.lowrance.com, and look for the Dealer Locator.
13