Cigarette Lighter Power Adapter With Speaker; Mmc Or Sd Memory Card Installation - Lowrance iWAY 100M Operation Instructions Manual

Cigarette Lighter Power Adapter with Speaker

To use external DC power: Plug the power cable's cigarette lighter
speaker adapter into a cigarette lighter receptacle. Next, pull aside the
rubber cover on the bottom of the unit and insert the other connector as
shown in the following image. A small clip on the connector should hold
the connector in place.
WARNING:
Do not remove the cigarette lighter speaker adapter and
splice the exposed wires directly to a 12-volt power sys-
tem. The cigarette lighter speaker adapter contains in
the plug a protective fuse and a voltage regulator to con-
vert 12 volts down to about 3 volts. Without this regula-
tor, connecting your unit to a 12-volt power source will
destroy the unit. This damage will not be covered by
your warranty.
The power cable has a built-in speaker that allows you to hear verbal
turn-by-turn driving directions. It has a headphone socket, volume con-
trol and a power indicator light. You can control the speaker's volume
either by adjusting the level on the control on the side of the speaker, or
by adjusting the iWAY's volume in the Main Menu. We'll explain how to
do that later in this manual.

MMC or SD Memory Card Installation

Your iWAY uses a MultiMedia Card to store information, such as cus-
tom maps, waypoints and other GPS data. The unit can also use Secure
Digital Cards (SD cards) to store information.
NOTE:
Throughout this manual, we will use the term MMC, but just re-
member that your unit can use an MMC or SD card to store data.
Attach external power cable to iWAY.
9