Overwrite - Lorex LW2301 Series Instruction Manual

Digital wireless quad surveillance system with built-in video recorder and indoor/outdoor motion camera

Hide thumbs Also See for LW2301 Series:

Table of Contents

Overwrite

Use the overwrite feature to have the system overwrite the oldest recorded data on the SD card

once the SD card is full.

Figure 10.4 Overwrite enable/disable

To enable overwrite:

1. From the Main Menu select Record and press the Enter/OK button.

2. From the record Menu select Overwrite and press the Enter/OK button.

3. Select Yes and press the Enter/OK button.

4. Press the Menu button until all menu windows are closed.

NOTE: If you do not enable Overwrite, the system will prompt you when the SD card is full

(flashing red icon). Also, when the SD card is full, a blue LED will light up under "FULL" on the

wireless receiver. You will need to manually delete files from the SD card or insert a new SD card

into the wireless receiver. For details, see "Appendix E: Deleting Video Files on the System" on

page 52.

Using the Main Menu

Table of Contents