Schedule Recording - Lorex LW2301 Series Instruction Manual

Digital wireless quad surveillance system with built-in video recorder and indoor/outdoor motion camera

Hide thumbs Also See for LW2301 Series:

Table of Contents

Schedule Recording

Use Schedule Recording to have the system automatically record continuously from a selected

camera or from Auto Sequence Viewing Mode according to a start and stop time. You must set a

Recording Schedule in the main menu in order to use Schedule Recording.

NOTE: Please ensure you have set the date and time on the receiver prior to setting a recording

schedule.

NOTE: Auto Sequence Viewing Mode

system will record video of the sequence itself. Therefore, you cannot playback video of individual

cameras.

Figure 7.1 Start and Stop Times for Schedule Recording

To set a recording schedule:

1. Press the MENU button to open the Main Menu.

2. Select Record and press the Enter/OK button.

3. Press RIGHT/LEFT to move the cursor (yellow); press UP/DOWN to change the hour and the

minutes.

NOTE: You need to press RIGHT to move the cursor from Start Time to Stop Time.

4. Press the Enter/OK button to save your schedule.

5. Press MENU until all menu windows are closed.

NOTE: You cannot enable Schedule Recording if the system is in Quad Mode.

available during Schedule Recording. However, the

Recording

Table of Contents