10
Stove Installation
Bypass Handle Installation
See Figure 4 for details on installing the bypass handle.
Rear Vent Configuration
The rear vent configuration is only for masonry fireplace installations (hearth stove). All steel chimney
applications require the top vent configuration.
The vent (chimney connector) may be directed to the rear of the appliance when installed into a masonry
fireplace. See Figure 5 for details.
© Travis Industries
(for qualified installers only)
Line up the set screws on the bypass handle
with the dimples on the bypass shaft. Tighten
with the included 1/8" hex wrench.
100-01177
1/8" Hex
Figure 4
4060802