Table of Contents
Advertisement
Setup Menu
Register the security code again
Enter a security code
Start the security code registration
Your security code has been registered.
If you press the Reset button or if you disconnect
your Receiver from the battery after the code
registration. you need to enter the registered
security code.
See below for details.
Reenter the same security code as that you have
entered in Step 3 for confirmation.
Reenter the security code
Register your security code
Input a four-digit number.
CD
Enters a security code.
CV
Clears your entry.
Q) Cancels the registration and returns to the
Security Code Setup screen.
@)
Enters the security code.
A
If you enter a different security code, the screen
~ returns to Step 3 (for the first code entry).
a
l"~
{ey}s.
II
li'1 ...-.'.
II
Li]IJ:DJI
When the Security Code function is activated, the
code can't be changed and the function can't be
released.
Note, the Security Code can be set as the 4 digit
number of your choice.
ecurit
Set u
Display the Security Code Setup screen
A
If you have already completed the code
~ registration, the ~ is not displayed.
<D
Returns to the Control screen of the previous
source.
CV
Calls the Sound Effects Menu. (see page 78)
0) Calis the Setup Menu.
(4) Allows you to start security code registration.
@ Turns the SI function On or Off.
If turned "On", the burglar alarm lamp flashes
when the vehicle ignition is off.
If
.leWWani'j.
is not shown, touch
~
or
~
to display it.
A
~
You can set a security code to protect your
receiver system against theft.
Security Code Setup
72 English
Advertisement
Table of Contents
