Kenwood DDX6017 Instruction Manual page 89

• MP3/WMA source
• ._. __ • •• • • ••••__ ' . __. ' •. __N •• N•••• __ ••• • •• __._. •• _0_._
L..
_~
__
.~~~
__
~:9i~
__
i : :__ : .:!-~_~~~~_? _~!. _~~~Y:
. .
:::> •
Clean the media, referring to the CD cleaning of the
section on <About discs> (see page 6) .
• The media is scratched or dirty.
• The recording condition is bad.
.
-
• Clean the media, referring to the CD cleaning of the
section on <About discs> (see page 6).
• Record the media again or use another media.
• There are times when it isn't displayed correctly according
to the MP3/WMA recording conditions.
:··-·~--R~~~-~d-i~-~~t-;.;:;~d~·;~--~~~f~-~~ity-~;th-th~-I-63-t~9---'--"'-,,:-
•
: version 1.x. /
L... . . ._. /-'
Record in conformity with the 103 tag version 1.x.
Also, the display may be incorrect if an MP3/WMA file
uses the 103 tag v1.x standard and if this standard has
been expanded after production of the machine software.
The following messages are displayed when certain problems are occurring in your system. Take
the recommended actions.
Hot Error
Hold Error
Mecha Error
Disc Error
Read Error
Region code Error
Parental level Error
Error 07 - 67
The protective circuit in the unit activates when the temperature inside the unit exceeds 60°C
(140°Fl. stopping all operation.
q
Cool down the unit by opening the windows or turning on the air conditioner. As the
temperature falls below 60°C (140°Fl. the disc will start playing again.
The protective circuit in the unit activates when the temperature inside the automatic disc
changer exceeds 60°C (140°Fl. stopping all operation.
q Cool down the unit by opening the windows or turning on the air conditioner. As the
temperature falls below 60°C (140°Fl. the disc will start playing again.
The disc player is malfunctioning.
q Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues
blinking or the disc cannot be ejected.
The unplayable discs is inserted.
The disc is upside-down.
q
Load the disc with the labeled side up.
The disc is quite dirty.
q
Clean the disc, referring to the section on <Disc cleaning> (see page 6).
The DVD software encoded for other region code.
The parental level is set to high levels.
The unit is malfunctioning for some reason.
q
Press the reset button on the unit. If the "Error
##"
code does not disappear, consult your
nearest service center.
English 89