Optional Wall Switch Or Thermostat Installation - Lopi Burner Owner's Manual

10

Optional Wall Switch or Thermostat Installation

Do not connect 110-120 VAC to the gas control valve or wiring system of this stove. The switch must
be installed by a qualified installer.
This stove may be installed with an optional wall switch or thermostat.
wires will interrupt the burner circuit (see item "a" below).
1. If you wish to bypass the switch, connect the thermostat (on/off switch) wires directly to the green and
white wires (see "b" below).
2. If you wish keep the switch (series) – re-align the wires as shown in item "c" below. NOTE: The
on/off switch must be in the "ON" position for the thermostat (or on/off switch) to operate.
© Travis Industries
Installation
POWER SUPPLY
Black
Black
COMFORT
CONTROL
Bypass
b
Thermostat or
On/Off Switch
Green
White
(for qualified installers only)
a
Burner Circuit Wires
Red
Green
Red
White
Red
AA
BATTERY
TRAY
c
White
Green
4090717
The thermostat (or on/off switch)
MAIN
BURNER
Series
Thermostat or
On/Off Switch
100-01225_000