Troy-Bilt Q92KP 60-1880 Operator's Manual page 14

PTO / Blade Engage Handle
Activating the PTO engages power to the cutting deck or other
(separately available) attachments. Push forward on the PTO/
Blade Engage handle to activate it. Pull the PTO/ Blade Engage
handle back to disengage the power to the cutting deck or other
(separately available) attachments.
NOTE: The PTO/Blade Engage handle must be in the disengaged
(OFF) position when starting the engine.
Electric PTO (Blade Engage) Knob
To engage the power to the cutting
deck or other (separately available)
attachments on models equipped
with an electric PTO, pull outward
on the PTO (Blade Engage) knob.
Push the PTO (Blade Engage) knob
inward to disengage the power to
the cutting deck.
NOTE: The PTO (Blade Engage) knob
must be in the disengaged (OFF)
position when starting the engine,
when traveling in reverse and if the
operator leaves the seat.
14 s 4— c
ectiOn OntrOls and
(If Equipped)
(If Equipped)
f
eatures
Parking Brake/ Cruise Control Lever
Located in the center of the tractor's dash
panel below the steering wheel, the Parking
Brake/Cruise Control lever is used to engage
the parking brake and the cruise control
Refer to the Operation section of this manual
for detailed instructions regarding the
parking brake.
NOTE: The parking brake must be set if the
operator leaves the seat with the engine
running or the engine will automatically shut
off.
NOTE: Cruise control can NOT be engaged
at the tractor's fastest ground speed. If the
operator should attempt to do so, the tractor
will automatically decelerate to the fastest
optimal mowing ground speed.
WARNING!
Never leave a running machine
unattended. Always disengage PTO, set parking
brake, stop engine and remove key to prevent
unintended starting.
Cargo Net (Optional)
Conveniently located on the tractor's dash panel, the cargo net
can be used to store personal items while operating the tractor.