Motorola RFS7000 Series Reference Manual page 263

Use the ) instance to configure Fast Ethernet (fe), Giga Ehternet (ge), StaticAggregate interface
(config-if
(sa), VLAN and tunnel . Use the
7.1 Interface Config commands
Table 7.1 summarizes the
config-if
Command
clrscr Clears the display screen.
description Interface specific description.
duplex Sets the duplex to interface.
end Ends the current mode and moves to the EXEC mode.
exit Ends the current mode and moves down to the previous mode.
help Describes the interactive help system.
ip Internet Protocol (IP).
mac MAC interface commands.
management Sets the selected interface as the management interface.
mtu Sets the mtu value for the VLAN interface.
no Negates a command or sets defaults.
(config)# interface [fe|ge|sa|tunnel|vlan]
commands.
Table 7.1 Interface Config Command Summary
Description
interface Instance
to reach this instance.
Ref.
page 7-3
page 7-4
page 7-5
page 7-6
page 7-7
page 7-8
page 7-9
page 7-11
page 7-12
page 7-13
page 7-14