Operation - Miele KM 2354 Operating And Installation Instructions

Operation

16
The control knob is used to ignite the burner and to regulate
the strength of the flame.
The burners can only be switched on by pressing in the
appropriate control and turning it anti-clockwise, and
switched off by turning the control clockwise. The outer
flame ring on the wok burner can only be switched on and
off by pressing the control in and turning it in the
appropriate direction.
The following will cause damage to the appliance:
- Switching on the burner without pressing the control
down
- Switching on the burner by turning the control
clockwise
- Switching the outer flame ring on or off without
pressing the control down
- Switching the burner off by turning the control
anti-clockwise.
The manufacturer will not accept liability for any damage
resulting from incorrect operation.