Installer's Instructions To User - Thermo Pride GMD1-80N Installation And Service Manual

All installations and services must be performed by qualified service personnel.
After completing the installation, the installer shall inform and/or demonstrate to the
homeowner:
1. The location of all the instructions in the furnace must be kept along with
instructions for any accessories in the plastic pouch near the furnace.
2. The location and use of the manual gas shut off valve and furnace electrical
disconnect switch. Instruct user to always shut off gas before shutting off electric
power.
3. The sequence of operation of the furnace.
4. The correct operation and maintenance of the appliance as outlined in the Users
Information section of this manual.
5. That failure to maintain and operate this furnace in accordance with these
instructions could result in hazardous conditions, bodily injury, and property
damage and may void the limited warranty on the furnace.
6. Review with and encourage the user to read the label reproductions and all
warnings and instructions outlined on the front cover and in sections I, II and III of
this manual and in the Users Information section of this manual.
7. Recommend the user has a qualified heating contractor inspect the furnace at the
start of each heating season. Inform the user of the frequency of inspection
required for reach item in the User Information Section of this manual.
V. INSTALLER'S INSTRUCTIONS TO USER:
29