Sharp XE-A203A Instruction Manual page 48

Function parameters for EJ
* Item:
A Always enter 0.
B Always enter 0.
C Temporary EJ printing during a transaction Disallow
D EJ printing and clearing EJ data when
issuing general Z1 report
E PGM mode operation records type
F REG/MGR/VOID modes operation
records type
G Compressing printing for EJ data
H Action when EJ memory area is full
On the default setting, an asterisk is marked.
Temporary EJ printing during a transaction
• If selecting "yes", you can print journal data of a current transaction recorded in EJ memory by pressing the
R
key during the transaction. To utilize this function completely, the cash register is programmed to receipt
printing and set Receipt ON/OFF function to OFF.
PGM mode operation records type
• The header information only is printed during the program reading operation.
The header information only is printed for X/Z reports.
(Receipt sample for Header Information only)
Action when EJ memory area is full
• By default, when the memory for EJ becomes nearly full, the cash register shows decimal points at the 8th
and 9th positions of the display (EJ memory nearly full message), and the cash register keeps storing new
data while erasing the oldest data. When "0" is selected, the cash register will no longer show EJ memory
nearly full message. When "2" is selected, the cash register shows EJ memory nearly full message and when
the memory is totally full, the cash register locks the sales/data entry with a display of the memory full
message " ". You will only be able to issue an EJ report.
Key operation example
00100002
46
s 68
s @
68
s A
To set "00000000"
@
*ABCDEFGH
Selection:
(Fixed position)
(Fixed position)
Allow*
No*
Yes
Details*
Header information only
Details*
Total
No (normal size)
Yes (small size)*
Continue
Warning (near full warning)*
Lock (with near full warning)
s
Entry:
0
0
0
1
0
1
0
1
0
1
0
1
0
1
2
Print
A