Download; Clear; Configuration - Canon imageRUNNER 2545 Series Service Manual Digest

[9] USB memory availability
[10] SD card volume
[11] USB serial number
[12] MAC address
[13] output the number of histories (communication history, copy/print/report/JOB history of the
reception print, jam history, E code history, humidity log)
[14] Counter ON/OFF

#DOWNLOAD

■ Download
The following parts of this unit can be upgraded by executing download mode using the
service support tool (UST)
(for more information, see the "Upgrading Targets and Procedure"(page
Main unit
ROM mounted on the main controller PCB (BOOT+PROGRAM)
ROM mounted on the DC controller PCB (DCON)
Accessory
ROM mounted on the finisher controller PCB(FIN_CON)

#CLEAR

Configuration

■
Group
TEL & USER DATA
SERVICE DATA
COUNTER
SOFT-CNT
TYPE
7-2).):
HST
CARD
ERR
PWD
FILE SYSTEM
FORMAT
FMT-SD
CA-KEY
ERDS-DAT
DEPT_USER_CLEAR
SYSTEM_INFO_CLEAR
ENGIN
EAM-DAT
Item Description
Clears all user-registered and -set areas of telephone
registration data and user data.
(Telephone registration refers to the registration of
codes on one-touch dialing, abbreviated dialing, and
group dialing.)
Clears theservice data. User data is not cleared.
Clears the maintenance counter, parts counter
and mode-specific counters. Initializes the counter
(numerator) in the system dump list.
Not used
Initializes user data and service data to suit specified
destination settings.
ACTIVITY Initializes the activity report
ACCOUNT Clears print histories.
JAM Clears the jam history.
ERR Clear the error (error code) history.
ALARM Clears the alarm history.
ENVIROMENT Initializes the enviroment log data.
Clears department management information held in
the controller before the card reader is demounted.
E719 Clears card reader errors.
Clears the system administrator's password.
Not used
USB MEMORY Format the USB memory. (This mode is used when
the USB memory error is damaged and E744 occurs.)
LICENSE DRIVE Clears the drive for license file.
512 Format the 512MB SD card.
1024 Format the 1204MB SD card.
2048 Format the 2048MB SD card.
Initializes an installed CA certification. (Displayed only
after activation of the e-RDS function.)
The settings related to e-RDS are cleared to the
factory settings. (Displayed only after activation of the
e-RDS function.)
Turns off the department-based ID management and
user management functions.
Clears the system management identification number.
ERRCLR Clears the engine errors.
BKRAMCLR Clears the engine backup RAM.
TNRINST Supplies toner from the toner cartridge to the
developing assembly.
Initializes the EAM Flash/SRAM data.
4
4-49