Checking The System Information; Setting The Date - Avaya 9504 User Manual

20. System Administration
If necessary, the system administrator can configure you as a 'system phone' user. This allows you to perform a range of
additional functions to help maintain your phone system, such as:
Checking the system and software version
·
Checking the time settings
·

Setting the date

· 134
Setting the time
· 136
Setting the time offset
·
System shutdown
·
Memory card/file system management
·
System alarms
· 139

20.1 Checking the System Information

Being able to check and report the system software version may be useful when reporting any potential problems to the
system administrator.
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down
3. Use the up and down
present then you may not have been configured as a system phone user by your system administrator.
4. Enter your security PIN (login code) and press Done.
5. Use the up and down
6. The system displays the following information about itself:
· The system type and the level of software it is running.
· The IP addresses of the two network interfaces.
· The serial number of the license key.
20.2 Setting the Date
The process below can be used when the telephone system does not obtain the time and date automatically. On systems
that are configured to obtain the time automatically, the option for checking the
instead.
1. Press the Features soft key if shown. To do this during a call, press the
Features soft key.
2. Use the up and down
3. Use the up and down
present then you may not have been configured as a system phone user by your system administrator.
4. Enter your security PIN (login code) and press Done.
5. Use the up and down
6. The current date being used by the telephone system is displayed.
7. Enter the required date, using the either the * or # keys to enter the / separators. To delete the previous digit or
character entered press Bksp.
8. When a complete valid date has been entered, the display will confirm that by showing the full date and the Set
soft key option.
9. To set the date as the new date to be used by the telephone system press Set.
9500 Series User Guide
IP Office™ Platform 9.1
134
135
136
137
138
arrow keys to highlight Phone User. Press Select.
arrow keys to highlight System Administration. Press Select. If the option is not
arrow keys to highlight System Information. Press Select.
arrow keys to highlight Phone User. Press Select.
arrow keys to highlight System Administration. Press Select. If the option is not
arrow keys to highlight Date. Press Select.
PHONE key and then press the
Time Server Status
135
PHONE key and then press the
Issue 10a (16 January 2015)
is available
Page 134