Connecting A Usb Storage Device - Denon HEOS Drive Owner's Manual

Contents
o Connecting a USB storage device
Connect a FAT32 formatted USB mass storage device containing
digital music files to any available USB port.
USB memory
device
Setup Use Troubleshooting
o Trigger Control
If the power amplifier connected to this unit has a trigger input
connector, connect it to the TRIGGER OUT jack of this unit using a
3.5mm cable (not included). A signal up to 12 V/150 mA is output from
the TRIGGER OUT jack.
Power amplifier
NOTE
0 Use a monaural mini-plug cable for connecting the TRIGGER OUT jacks. Do not
use a stereo mini-plug cable.
0 The Trigger settings must be set in order to use Trigger Control. (v p. 43)
17
Status LED Appendix