Drain Line Replacement - Graco 190ES Repair Manual

Drain Line Replacement

Removal
1. Cut drain line (49) from barbed fitting (51).
2. Unscrew barbed fitting from filter manifold (43).
To reuse existing barbed fitting (51) and drain line
(49), cut and remove remaining drain line material
from end of barbed fitting.
312805A
Installation
1. Screw barbed fitting (51) into filter manifold (43).
2. Push drain line (49) onto barbed fitting.
To make drain line more pliable and easier to install
over barbed fitting, heat end of drain line (49) with a
hair dryer or place end in hot water a few seconds.
43
51
49
ti9156a
Drain Line Replacement
23