Fuse Replacement
If the fuse is blown, check for:
•
Pinched or shorted wires
•
A defective motor (see Spin Test, page 15)
•
A locked or frozen pump
Correct defective condition before replacing fuse.
312805A
Removal
1. Relieve pressure, page 5. Disconnect power cord
from outlet.
2. Remove the following from 210
a. Remove kick stand (66)
b. Remove two screws (5) and toolbox (3).
3. Remove two screws (11) and front cover (32).
Remove screw (13) and shroud (12) (see illustra-
tion, page14).
4. Remove fuse from control board.
Installation
1. Install Fuse 119277 on control board.
2. Install shroud (12) with screw (13). Install front cover
(32) with two screws (11). (see illustration, page 14).
3. Install the following on 210
a. Install toolbox (3) with two screws (5).
b. Install kick stand (66).
Replaceable Fuse
ti9134b
Fuse Replacement
Hi-boy models:
ES
.
Hi-Boy models:
ES
19