Shindaiwa LE242 Owner's/Operator's Manual page 7

Assembly (continued)
Adjust Throttle Trigger Free Play
The throttle trigger free play should be
approximately 4 - 6 mm (3/16 - 1/4 in.).
Make sure that the throttle trigger
operates smoothly without binding.
If it becomes necessary to adjust the
trigger free play, follow the procedures
and illustrations that follow.
1. Loosen the air cleaner cover knob
and remove the air cleaner cover.
2. Loosen the lock nut on the cable
adjuster.
3. Turn the cable adjuster in or out as
required to obtain proper free play
4 - 6 mm (3/16 - 1/4 in.).
4. Tighten the locknut.
5. Reinstall the air cleaner cover.
Remove air cleaner cover
Cable
Adjuster
Lock Nut
Adjust as required for 4-6 mm free play
4-6 mm (3/16 - 1/4 in.)
Throttle Trigger Free Play
Throttle Free Play
7