Using the Wireless Controller
Point it at the camcorder's remote
sensor when you press the buttons.
l.osert.ing. . . .
I3~tteri.e.s.
The wireless controller operates with two AA (R6) batteries.
1. Open the battery cover.
2. Insert the batteries following the
+
and - markings.
Replace both batteries.
3. Close the battery cover.
20
o
Camcorder and wireless controller are equipped with 2 remote sensor modes
(CD 77). If the wireless controller does not work, check if camcorder and
wireless controller are set to the same mode.
a
The wireless controller may not work properly when the remote sensor
IS
subjected to strong light sources or direct sunlight.