Canon Elura 60 Instruction Manual page 121

D
Refer to the instruction manual of each printer for information all which
interface cable to use with the camcorder.
The Canon CP~Prillters CP~ 10 and CP-1 00 are supplied with two direct
interface cables. Use the cable with the USB logo on the connector (DIF-1 00).
o
We recommend powering the camcorder from a household power source.
o
Refer also to the instruction manual of the respective printer.
o
The print setting menu may differ slightly depending on the connected printer.
1. Select the still image you wish to print with the
CARD +/- button.
2. Press the
~IIV'
(print/share) button.
• Printing starts. The
~IIV'
button flashes and glows steadily
when printing is complete.
• If you wish to continue printing, select another still Image with
the CARD +/- button.
@
RE( SEARCH
~A~
120
o
Observe the following precautions during printing, otherwise printing may not
be performed correctly.
~
Do not turn off the camcorder or the printer.
~
Do not change the position of the TAPE/CARD switch.
- Do not detach the cable.
- Do not open the memory card cover or remove the memory card.
o
Images not recorded with this camcorder, uploaded from a computer, edited
on a computer and Images whose file names have been changed may not be
printed correctly.
o
Cancel Printing
Press the SET dial dunng printing. A confirmation dialog appears. Select [OK]
and press the SET dial.
- Canon Bubble Jet Printer: Printing stops even if it is incomplete and the
paper is fed through.
- Canon CP-Pnnter: A print in progress cannot be stopped. Printing stops
when the current print is finished and the remaining prints are canceled.
o
Printing Errors
If an error occurs dUring the printing process, an error message appears
(CO 140).
- Canon Bubble Jet Printer: Select [STOP] or [CONTINUE] and press the SET
dial. With most errors, printing resumes automatically after you correct the
error. Refer also to the printer manual for details.