Canon Elura 60 Instruction Manual page 37

T)ls,wj,tb,. . S . . , .(S1')i;:.\lidieQ,.blP.ut. .
ler(tli.o~d,.,.","'"
Refer also to the TV or VCR instruction manual.
Signal flow
q
Signal flow
q
INPUT
8(51 )-VIDEO
... .....@
S-150 S-video Cable (optional)
STV-250N Stereo Video Cable
(supplied)
1. Turn off all devices before starting the connections.
2. Connect the S-150 S-video Cable (optional) to the S-video terminals.
3. Connect the STV-250N Stereo Video Cable to the camcorder's AV
terminal and the audio terminals of the TVIVCR.
Connect the white plug to the white AUDIO terminal L (left), and the red plug to the
red AUDIO terminal R (right). Do not connect the yellow plug.
4. If connecting to a TV, set the input selector to VIDEO. If connecting to a
VCR, set the input selector to LINE.
o
We recommend powering the camcorder from a household power source.
o
The picture quality is higher when connecting to a TV with an S (S 1) terminal.
o
TVs with S1-terminal or Video 10-1 system: Recordings made in the 16:9 mode
will be automatically played back in widescreen mode.
36