Camera Operation - GEM PTZ635 Handbook & Instructions

Camera Operation

Self Test
After turning on the PTZ it will automatically start to
pan and tilt as it preforms a self-test. The self-test will
check all functions are working as they should be.
Controlling The PTZ
The PTZ635's functions can be controlled through a
keypad or compatible DVR.
Creating Presets
Creating a new preset is done in 3 easy steps:
Select the camera you would like to create
1.
a preset for.
Position and zoom the camera as required.
2.
Press PRESET. Input the number you would like
3.
assigned to the new preset. Finally press
to save the new preset.
8
Calling Presets
To call a preset follow the steps below:
Select the desired camera.
1.
Press
2.
you wish to call and press ENTER.
Creating Patrols (Tours)
A patrol ( tour ) is a collection of at least 3 presets. The
presets are run in order with the camera stopping at
each preset before moving on to the next
To create a patrol follow these steps:
Enter the main menu
1.
Go to
2.
Set the patrol number
3.
ENTER Go to
4.
speed the PTZ moves between positions and the
amount of time the PTZ stays in each position.
Manual ref: XPTZ635
( Call ) , input the number of the preset
SHOT
SHOT 
SYSTEM SETTINGS

and add presets to the patrol, set the
EDIT
95  ENTER
PATROL TRACK