Summary of Contents for GEM PTZ635
- Page 1 PTZ635 Handbook & Instructions High speed mini IR PTZ panning at 200º a second. XPTZ635...
- Page 2 Introduction The PTZ635 is a stunning mini IR PTZ camera. It’s simple to setup thanks to its auto protocol, auto baud rate features and easy to use menu system. Unlike some other PTZs the PTZ635 reacts instantly to keyboard or DVR commands. With a pan speed of 200º...
-
Page 3: Ptz Control
IR LEDs adjusts its Pan/Tilt speed according to zoom level. This ensures easy control and accurate movement at Night Vision - With its 6 powerful IR LEDs the • all times. PTZ635 is able to see in complete darkness. www.systemq.com... -
Page 4: Wall Mounting
Mounting The PTZ The PTZ635 can be wall or ceiling mounted. Ceiling Mounting To ceiling mount the camera, remove the wall mount Wall Mounting bracket by unscrewing the three screws on the top To wall mount the camera simply drill four holes as of the PTZ. -
Page 5: Camera Setup
Camera Setup The cameras Baud Rate, Terminal Resistor are all controlled using dip switches located on the underside of the dome, above the lens. PTZ number 1 PTZ number 2 Unscrew the two screws and remove the clear plastic cover to gain access to the dip switches. There are to sets of dip switches. -
Page 6: Baud Rate Setup
Auto Terminal Resistor Setup Star Formation The PTZ635 has an in-built 120Ω terminal resistor. When setting up multiple PTZs certain PTZs must have their resistors enabled. When setting up PTZs in a Daisy Chain formation the last PTZ must have its resistor enabled. - Page 7 Wiring The PTZ635 with RG59+4 (PTZ Combo Cable) CON370 ZULUG DC Plug with Terminal Strip adaptor 12V DC PSU From PTZ Terminal To DVR or Block Monitor RS485 Keyboard or Test Monitor to control OSD www.systemq.com...
-
Page 8: Camera Operation
SHOT you wish to call and press ENTER. Controlling The PTZ The PTZ635’s functions can be controlled through a Creating Patrols (Tours) keypad or compatible DVR. A patrol ( tour ) is a collection of at least 3 presets. The... -
Page 9: Calling Patrols
Camera Operation Calling Patrols Go to to start recording the pattern EDIT ( Open ) to stop recording Press IRIS+ To call a patrol press ENTER. NNN CALL represents the patrol number you wish to call. e.g. calls patrol 1, calls patrol 2 etc. - Page 10 Pre-installed Presets The PTZ635 comes with a large number of presets all ready set up. These presets cover popular functions, configuration and maintenance. Preset Number Function Preset Number Function Displays the PTZs main menu Clear screen Preforms a High speed...
-
Page 11: Osd Menu System
OSD Menu System This section explains the OSD menu system and how Move the joystick to select different DOWN to navigate through it using a keypad. items in the current menu. Pressing the (Iris Open) IRIS+ key confirms a selection. Press the (Iris Close) key IRIS- to cancel and return to the previous menu. -
Page 12: System Information
OSD Menu System System Information Menu Item Function Options Available Protocol Displays the communication protocol of the PTZ Auto Baud Rate Displays the communication speed of the PTZ Auto Hard Addr Displays the hardware address 1 - 255 Soft Addr Displays the soft address 1 - 255 Soft Addr Enable... -
Page 13: System Settings
OSD Menu System System Settings Menu Item Function see page 14 Camera Displays the Camera menu see page 15 Movement Control Displays the Movement Control menu see page 16 Preset Displays the Preset menu see page 16 Patrol Track Displays the Patrol Track menu see page 17 Pattern Displays the Pattern menu... - Page 14 OSD Menu System Camera Menu Item Function Options Available Screen Tips Enable/disable inner tips of the zoom module On / Off Auto ICR Enable/disable auto colour to B&W On / Off Auto Focus Enable/disable auto focus On / Off Focus Speed Set the focus speed of the PTZ Fast / Slow Digital Zoom...
-
Page 15: Movement Control
OSD Menu System Movement Control Menu Item Function Options Available Auto Flip Image will automatically flips so that it always viewed On / Off the correct way up Proportion Pan Pan/tilt speed automatically decreases according to On / Off zoom level Park Time Set amount of time idle before park action starts 0 - 255... - Page 16 OSD Menu System Preset Menu Item Function Options Available Number Select the number of the preset required 1 - 220 Default ( Can not be changed ) Label Edit Set position and zoom for chosen preset Remove Delete selected preset 1 - 220 Exit Exit the Preset menu...
- Page 17 OSD Menu System Pattern Menu Item Function Options Available Number Select the number of the pattern required 1 - 4 Edit Edit and record path for selected pattern At least 120 Secs / Max 100 Movements Preview Preview the pattern selected 1 - 4 Remove Delete selected pattern...
- Page 18 OSD Menu System Remove Menu Item Function Options Available Preset Delete the selected preset 1 - 220 Patrol Track Delete the selected patrol track 1 - 8 Pattern Delete the selected pattern 1 - 4 Exit Exit the Remove menu IR LED Setting Menu Item Function...
-
Page 19: Fault Finding
Fault Finding Fault Check Possible Cause Solution No movement and no image Power adapter Faulty/wrong power supply Replace power supply after power up There is an image but the Motor for any peculiar Mechanical problem Check nothing is stuck in the camera does not self-test sounds PTZ preventing movement... - Page 20 Other Products To Consider - AlienDVR 10 Reasons is great value for money alienHero 16ch 1. Built-in Video Analytics (fi nds evidence instantly!) Order Codes ALIEN654K 4ch 1TB: 2. True Realtime D1 Recording (even on the 16ch ) ALIEN658K 8ch 1TB: 3.
- Page 21 Other Products To Consider - PTZ Accessories RS485 Combiner PTZ Keyboard Controller • 4 Inputs for control devices • 1 Output for Up To 128 PTZ Cameras • Wall Mount Control multiple PTZ cameras from up to four devices down one RS485 cable.
- Page 22 Other Products To Consider - Power & Connection RG59+4 ( PTZ Combo ) Zulug Connectors Solid copper centre Glued foil sheath provides maximum core for long runs The Zulug range of DC connectors are a hassle free way of protection against interference and prevents extending the distance between a camera and a power supply.
- Page 23 Other Products To Consider - Useful Tools BNC Ratchet Crimp CCTV Test Monitor • PTZ Control Testing • DC/AC Voltage Tester • RS485 Data Test Function • 29 Protocols Supported • Check Video Signal Strength • 12V Camera Power Function •...
-
Page 24: Technical Specifications
Technical Specifications Function Specification Function Specification Resolution 650TVL Presets Digital Zoom Preset Modes Patrol / Auto Scan / Pattern Power Input 12V ±10% Patrols ( Tours ) Current Consumption Patterns Built In ( 120Ω ) Terminal Resistor Operating Environment Outdoor: -20ºc to 60ºc Indoor: -10ºc to 50ºc Communication...