Dual xhd7720 Installation & Owner's Manual page 9

XHD7720 OPERATION . .
HD Radio™ AM/FM Tuner Operation
Analog and Digital Tuning The following tuning functions will access both anaLog and
digitaL stations. Refer to the HD SEEK mode section on page
10 for instructions on tuning to onLy digitaL stations.
Seek Tuning Press TUNE
~~
or TUNE
~~
for more than one second to
seek the next strong station.
I
When an HD Radio station is seLected. an HD Radio Logo will
begin to flash on the dispLay. In about five seconds. HD or
HD1 wiLL illuminate after the radio frequency.
• If "HD" appears. the radio station is broadcasting a higher
quality sound. No additionaL stations are availabLe.
• If "HD1" appears. additionaL multicast channeLs (HD2
and/or HD3) are availabLe. Press TUNE
~~
to tune to
other avaiLabLe muLticast channeLs.
Manual Tuning Press TUNE
~~
or TUNE
~~
momentariLy to move radio
frequency up or down one step at a time.
Scan Tuning Press SCAN momentariLy to preview strong stations on the
current band. pausing for five seconds at each. Press SCAN
again to cancel.
Band Press BAND to seLect between FM1. FM2. FM3. AM1 and
AM2 bands. Up to six presets can be programmed for each
band.
Storing and Recalling Up to 18 FM stations and 12 AM stations can be stored.
Station Presets including HD Radio stations and multicast channeLs. To store
a.station. seLect the desired band and station. Press and hoLd
the desired preset button (1-6) for more than two seconds.
When stored. the preset number will appear in the dispLay.
The station can be recalled by pressing the corresponding
preset button.
9