Dual xhd7720 Installation & Owner's Manual page 8

Am/fm/cd/mp3/wmaiusb/3.5mm/ipod/bluetooth ready/hd radio/ itunes tagging receiver with 2-step motorized detachable face
Hide thumbs Also See for xhd7720:
Table of Contents

Advertisement

Press AUDIO/MENU until TREBLE appears. then press
SELECT to confirm. Rotate volume left/right to adjust ( -6
minimum / +6 maximum).
Press AUDIO/MENU until BASS appears. then press SELECT
to confirm. Rotate volume left/right to adjust (-6 minimum /
+6 maximum).
. . XHD7720 OPERATION
General Operation
Escape
Press ESC to exit any menu adjustment mode.
Audio
Press AUDIO/MENU momentarily to select between Volume
(default). Bass. Treble. Balance. Fader. Subwoofer and
Source Volume Level.
I
r
VOLUME .... BASS .... TREBLE .... BALANCE .... FADER .... SUBWOOFER .... SOURCE LEVEL-,
l
Bassi
I
Treble
I
I
; Note: Any adjustment to the Bass or Treble settings
I
automatically cancels the current EQ curve (if one is
1
selected).
"
Note: Bass and Treble settings are retained for each mode
individually.
Balance
Press AUDIO/MENU until BALANCE appears. then press
SELECT to confirm. Rotate volume left/right to adjust
(BALANCE L12 - R12). BALANCE L=R represents equal
I
balance.
Fader·. Press AUDIO/MENU until FADER appears. then press
SELECT to confirm. Rotate volume left/right to adjust
(FADER F12 - R12). FADER L=R represents equal fader.
Subwoofer
Press AUDIO/MENU until SUB-W appears. then press
SELECT to confirm. Rotate volume left/right to adjust (0-12).
Adjusting levels to 0 turns the subwoofer off.
Source Volume Level
The source volume level control allows a gain adjustment
for each audio source: AM. FM. CD. AUX. USB and Bluetooth.
Set the source volume level for each mode. depending on
the relative volume of each audio source.
To set the source volume level. press AUDIO/MENU until
SRC LEVEL appears. After one second. the current mode
will appear on the display. Turn the volume knob to adjust
the audio level of the current source (-6 minimum/+6
maximum).
Note: Only the current mode will be available for adjustment.
To adjust another mode of operation. press MODE until the
desired mode is selected. then set the source volume level
for that mode.
_ _ _ _ _ _ _ _ _.....,J..
• _ _
. ~
8

Advertisement

Table of Contents
loading

Table of Contents