Honda 2016 Fit Owner's Manual page 77

uuIndicatorsu
Indicator Name
U.S.
models
only
Low Tire Pressure/
TPMS Indicator
Smart Entry System
Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
76
On/Blinking
Comes on for a few seconds when you
●
turn the ignition switch to ON
goes off.
May come on briefly if the ignition switch
●
is turned to ON
not moved within 45 seconds, to indicate
the calibration process is not yet
complete.
Comes on and stays on when:
●
- One or more tires' pressures are
determined to be significantly low.
- The system has not been calibrated.
Blinks for about one minute, and then
●
stays on if there is a problem with the
TPMS, or when a compact spare tire is
temporarily installed.
Comes on for a few seconds when you
●
change the power mode to ON.
Comes on as soon as a problem is
●
*
detected in the smart entry system or
push button starting system.
Comes on while driving - Stop in a safe place,
●
*1 , then check tire pressures, and inflate the tire(s) if
( w
necessary.
Stays on after the tires are inflated to the
●
( w *1 and the vehicle is recommended pressures - The system needs to be
calibrated.
Blinks and remains on - Have your vehicle
●
checked by a dealer. If the vehicle is fitted with a
compact spare, get your regular tire repaired or
replaced and put back on your vehicle as soon as
you can.
Stays on constantly or does not come on at all
●
- Have your vehicle checked by a dealer.
Explanation
2 TPMS Calibration P. 334