Honda 2016 Fit Owner's Manual page 128

■
Rear Wiper/Washer
INT: Intermittent
ON: Continuous wipe
OFF
Washer
■
Operating in reverse
When you shift the transmission to
operates automatically as follows even if its switch is off.
Front Wiper Position
INT (Intermittent)
LO (Low speed wipe)
HI (High speed wipe)
*1 : Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
The rear wiper and washer can be used when
the ignition switch is in ON
■
Wiper switch (OFF, INT, ON)
Change the wiper switch setting according to
the amount of rain.
■
Washer ( )
Sprays while you rotate the switch to this
position.
Hold it to activate the wiper and to spray the
washer. Once released, it stops operating
after a few more sweeps.
R with the front wiper activated, the rear wiper
(
Rear Wiper Operation
Intermittent
Continuous
uuOperating the Switches Around the Steering WheeluWipers and Washers
1Wipers and Washers
If the wiper stops operating due to any obstacle such
as the build-up of snow, park the vehicle in a safe
( w *1 .
place.
Rotate the wiper switch to OFF, and turn the ignition
switch to ACCESSORY
remove the obstacle.
The wiper motor is equipped with a breaker that may
stop motor operation temporarily to prevent an
overload. Wiper operation will return to normal
within a few minutes, once the circuit has returned to
normal.
or LOCK *1 , then
( q ( 0
127