Honda 2016 Fit Owner's Manual page 75

uuIndicatorsu
Indicator Name
High Temperature
Indicator
(Red)
Low Temperature
Indicator
(Blue)
Vehicle Stability
Assist (VSA®) System
Indicator
Vehicle Stability
Assist (VSA®) OFF
Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
74
On/Blinking
Comes on for a few seconds when you
●
turn the ignition switch to ON
goes off.
Blinks when the engine coolant
●
temperature goes up, and stays on if the
temperature continues to rise.
Comes on when the engine coolant
●
temperature is low.
Comes on for a few seconds when you
●
turn the ignition switch to ON
goes off.
Blinks when VSA® is active.
●
Comes on if there is a problem with the
●
VSA® system or hill start assist system.
Comes on for a few seconds when you
●
turn the ignition switch to ON
goes off.
Comes on when you deactivate VSA®.
●
Goes off, then comes on blue when the engine
●
coolant temperature is low.
*1 , then
( w
Blinks while driving - Drive slowly to prevent
●
overheating.
Stays on while driving - Immediately stop in a
●
safe place and allow the engine to cool.
2 Overheating P. 415
If the indicator stays on after the engine has reached
●
normal operating temperature, there may be a
problem with the temperature sensors. Have your
vehicle inspected by a dealer.
Stays on constantly - Have your vehicle checked
●
( w *1 , then by a dealer.
2 Vehicle Stability Assist (VSA®), aka Electronic
Stability Control (ESC), System P. 330
*1 , then
( w
2 VSA® OFF Button P. 331
Explanation