Related Manuals for Linksys SR2246
Summary of Contents for Linksys SR2246
- Page 1 24-Port 10/100 + 1-Port Gigabit Switch + 1 miniGBIC Use this guide to install: SR224G User Guide...
- Page 2 (the “Warranty Period”) Your Linksys product will be free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys’s entire liability under this warranty will be for Linksys at its option to repair or replace the product or refund Your pur- chase price less any rebates.
-
Page 3: Table Of Contents
No matter how intensive your network demands, the Linksys 24-Port 10/100 + 1-Port Gigabit Switch + 1miniGBIC has speed, flexibility, and reliability that you can count on. -
Page 4: Chapter 2: Getting To Know The 24-Port 10/100 + 1-Port Gigabit Switch + 1 Minigbic
Switch + 1 miniGBIC Front Panel LEDs and Ports Figure 2-1 The LEDs and network ports are located on the front panel of the Switch. All network ports are independent, so you can use all of them simultaneously. LEDS System Green. -
Page 5: Chapter 3: Connecting The 24-Port 10/100 + 1-Port Gigabit Switch + 1 Minigbic
Connecting Network Devices To connect network devices to the Switch, follow these instructions: 1. Make sure all the devices you will connect to the Switch are powered off. 2. Connect a Category 5 Ethernet network cable to one of the numbered ports on the Switch. -
Page 6: Placement Options
1000Base-T are the same as those used for 100BaseT. Category 5 link lengths are limited to 100 meters by the ANSI/TIA/EIA-568-A cabling standard. Auto MDI/MDI-X - On a network hub or switch, an auto MDI/MDI-X port automatically senses if it needs to act as a MDI or MDI-X port. The auto- MDI/MDI-X capability eliminates the need for crossover cables. -
Page 7: Appendix B: Specifications
MDI (Medium Dependent Interface) - On a network hub or switch, a MDI port, also known as an uplink port, connects to another hub or switch using a straight- through cable. To connect a MDI port to a computer, use a crossover cable. -
Page 8: Appendix C: Warranty Information
CALL LINKSYS FOR MORE DETAILS. Appendix D: Contact Information For help with the installation or operation of this 24-Port 10/100 + 1-Port Gigabit Switch + 1 miniGBIC, contact Linksys Technical Support at one of the phone numbers or Internet addresses below. Sales Information... - Page 9 © Copyright 2003 Cisco Systems, Inc. All Rights Reserved.